DMT-Nexus Wiki - User contributions [en]

Hyperspace lexicon

2010-02-23T13:56:58Z

Rawmo:

{{ShowInfo|[[Image:Note_error.png]]|'''Note:'''|This page is a collection of phrases from 'the Proposed project to better understand Hyperspace' <ref>Proposed project to better understand Hyperspace
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&m=65786]</ref> and 'Hyperspace Lexicon work thread' <ref>Hyperspace Lexicon work thread
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&m=65842]</ref>. Feel free to make additions}}

The Hyperspace lexicon is here to make a compilation of phrases to better understand and describe hyperspace journeys for both the layman and advanced hyperspace travelers.

== Collection ==

=== Breakthrough ===
State traveler gets after ingesting the breakthrough dose of DMT.

=== Candyland ===
The visual of a pristine polished "enhanced" open eyed reality.

=== Carrier wave ===
Just after a launch, [[Traveler|travelers]] often hear a ringing tone or vibration somewhat resembling a carrier wave. As the ringing sensation continues one can even feel that this vibration is 'resonating in every cell of the body'.

=== Entities ===
[[Hyperspace]] is filled with entities. These entities show a remarkable variety in appearance and behavior. This chapter includes some often sighted entities.

==== Cartoons ====
==== Dragon ====
==== Gnomes ====
==== Grays ====
==== Light beings ====
==== Machine elves ====

The Tykes. [http://deoxy.org/timemind.htm]

==== Praying Mantis ====
==== Reptiloids ====
==== Snakes ====

=== Spice ===
Slang term for DMT/Dimitri/Teamwork/Deemster

=== Jungle Spice ===
The darker spice that looks yellowish to reddish

=== Glass chrysanthemum ===
The kaleidoscopic/fractal pattern that turns into the doorway to [[Hyperspace]].[http://www.dmt-nexus.com/forum/default.aspx?g=posts&t=5549]

=== Gifts/Presents ===
Sometimes the [[Entity|entities]] present gifts to the [[Hyperspace|hyperspace]] [[Traveler|traveler]]. These gifts can be 'sculptures', 'orbs', 'Faberge eggs from mars', 'extra-terrestrial notions', 'glyphs' and many other things.

=== Hyperspace ===
The place you go to after breakthrough, can be any place and time imaginable. Where the impossible can easily happen, extreme geometric explosions of color, sound, emotions, information, also the feeling of it being [[hyperreal]].

=== Jimjam ===
{{:Jimjam}}<ref>Jorkest's D-Limonene & Fumaric Acid Approach
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&m=65307#post65307]</ref> Also see [[Plasmatis]].

=== Planck Time ===
The smallest unit of time that can be mathematically described. When you feel time compressing in to smaller and smaller units, you are approaching Planck Time. When you reach it, you experience time 'stopping'.

=== Plasmatis ===
The multicolored constantly shifting gel-goo of amazement which decorates the space around everything in the land of the [[elves]]. Also see [[Jimjam]].

=== Pre flight anxiety ===
Pre flight anxiety is the anxiety one has just before liftoff into [[Hyperspace]]. Since being shot into hyperspace is such a stressful and powerful moment people are in some way afraid of that moment, the anxiety they undergo at that specific moment is known as 'pre flight anxiety'.
Many also report that this Pre flight anxiety diminishes shortly after entering hyperspace or upon returning from hyperspace.

=== SPO ===
===== Short description =====
Static Pattern Overlay
===== Long description =====
The static pattern overlay(SPO?) is the way 'they' communicate with me on lower doses. Faces from every ancient era show up in any uniform surface. The best ever was a picture of my favorite fractal. I thought I would be most fascinated by the fractal swirls but the static, slightly irregular monochromatic background showed me more in one square foot than I'd ever seen before. I am always like-'how do they do that?' or 'they are so clever' because you can blink or look away change your point of view and the same image persists! <ref>Breakthrough with eyes open?
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&m=47009#post47009]</ref>

=== Stuck in a loop ===
When your mind keeps repeating the same thoughts or events over and over again in a seemingly infinite loop. <ref>Ever been stuck in a loop?
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&t=2109]</ref>

=== The Throat Marble ===
This is a symptom one can have while visiting Hyperspace. Feeling as though you don't need to breathe. Also discribed as the feeling of a rolling ball trapped in the back of ones throat. <ref>Strange "Ball" Feeling
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&t=4786]</ref>

=== Exploring ===
This is a symptom one has after the return from Hyperspace. Also described as a warped or more appreciative view of reality. Symptoms include seeing sounds and hearing colors.

=== Bifurcations ===
From a single point or concept [node] a 2 path branch appears [often both visually and in sense of thought/concepts] of both potentials.
This often is experienced as then proceeding into an infinite number of branches

=== Mirror ===
When a DMT journey travels in time one way [standard forward], and then near the end of the trip quickly rewinds back through the entire trip

=== DMT Fold ===
Folding back into 'normal space' after a trip. May be seen as similar to 2 steps coming together
|_ _|
|_ _|
|_|
Perceived as more complex 'concepts'/realities folding down into simpler / more normal / less infinite 'concepts' /realities.
The aspects of the previous (higher) level not being able to be described by the lower level except as metaphor.

=== Audio Wind up/out ===
Where near the end of an experience as the entities leave your perceptual field their communication changes from an understandable form (e.g. 'telepathic'/talking) into a 'winding up sound', similar to an audio delay being fed back into itself and the rate increased until it just becomes a buzz as it disappears.
The sound is also highly resonant [i.e. chime or bell like]

== Reference ==
<references/>

== Links ==
* [http://en.wikipedia.org/wiki/List_of_medical_roots,_suffixes_and_prefixes medical roots, suffixes and prefixes]
* [http://en.wikipedia.org/wiki/Glossary_of_anatomical_terminology,_definitions_and_abbreviations anatomical terms]
* [http://www.solarviews.com/eng/terms.ht astronomy terms]
* [http://www.chemistry-dictionary.com/dictionary.php?w=A chemistry terms]
* [http://www.ibiblio.org/botnet/glossary/ botanical terms]

[[Category:Terminology]]
[[Category:DMT-Nexus Projects]]

Hyperspace lexicon

2010-02-23T13:55:42Z

Rawmo:

{{ShowInfo|[[Image:Note_error.png]]|'''Note:'''|This page is a collection of phrases from 'the Proposed project to better understand Hyperspace' <ref>Proposed project to better understand Hyperspace
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&m=65786]</ref> and 'Hyperspace Lexicon work thread' <ref>Hyperspace Lexicon work thread
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&m=65842]</ref>. Feel free to make additions}}

The Hyperspace lexicon is here to make a compilation of phrases to better understand and describe hyperspace journeys for both the layman and advanced hyperspace travelers.

== Collection ==

=== Breakthrough ===
State traveler gets after ingesting the breakthrough dose of DMT.

=== Candyland ===
The visual of a pristine polished "enhanced" open eyed reality.

=== Carrier wave ===
Just after a launch, [[Traveler|travelers]] often hear a ringing tone or vibration somewhat resembling a carrier wave. As the ringing sensation continues one can even feel that this vibration is 'resonating in every cell of the body'.

=== Entities ===
[[Hyperspace]] is filled with entities. These entities show a remarkable variety in appearance and behavior. This chapter includes some often sighted entities.

==== Cartoons ====
==== Dragon ====
==== Gnomes ====
==== Grays ====
==== Light beings ====
==== Machine elves ====

The Tykes. [http://deoxy.org/timemind.htm]

==== Praying Mantis ====
==== Reptiloids ====
==== Snakes ====

=== Spice ===
Slang term for DMT/Dimitri/Teamwork/Deemster

=== Jungle Spice ===
The darker spice that looks yellowish to reddish

=== Glass chrysanthemum ===
The kaleidoscopic/fractal pattern that turns into the doorway to [[Hyperspace]].[http://www.dmt-nexus.com/forum/default.aspx?g=posts&t=5549]

=== Gifts/Presents ===
Sometimes the [[Entity|entities]] present gifts to the [[Hyperspace|hyperspace]] [[Traveler|traveler]]. These gifts can be 'sculptures', 'orbs', 'Faberge eggs from mars', 'extra-terrestrial notions', 'glyphs' and many other things.

=== Hyperspace ===
The place you go to after breakthrough, can be any place and time imaginable. Where the impossible can easily happen, extreme geometric explosions of color, sound, emotions, information, also the feeling of it being [[hyperreal]].

=== Jimjam ===
{{:Jimjam}}<ref>Jorkest's D-Limonene & Fumaric Acid Approach
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&m=65307#post65307]</ref> Also see [[Plasmatis]].

=== Planck Time ===
The smallest unit of time that can be mathematically described. When you feel time compressing in to smaller and smaller units, you are approaching Planck Time. When you reach it, you experience time 'stopping'.

=== Plasmatis ===
The multicolored constantly shifting gel-goo of amazement which decorates the space around everything in the land of the [[elves]]. Also see [[Jimjam]].

=== Pre flight anxiety ===
Pre flight anxiety is the anxiety one has just before liftoff into [[Hyperspace]]. Since being shot into hyperspace is such a stressful and powerful moment people are in some way afraid of that moment, the anxiety they undergo at that specific moment is known as 'pre flight anxiety'.
Many also report that this Pre flight anxiety diminishes shortly after entering hyperspace or upon returning from hyperspace.

=== SPO ===
===== Short description =====
Static Pattern Overlay
===== Long description =====
The static pattern overlay(SPO?) is the way 'they' communicate with me on lower doses. Faces from every ancient era show up in any uniform surface. The best ever was a picture of my favorite fractal. I thought I would be most fascinated by the fractal swirls but the static, slightly irregular monochromatic background showed me more in one square foot than I'd ever seen before. I am always like-'how do they do that?' or 'they are so clever' because you can blink or look away change your point of view and the same image persists! <ref>Breakthrough with eyes open?
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&m=47009#post47009]</ref>

=== Stuck in a loop ===
When your mind keeps repeating the same thoughts or events over and over again in a seemingly infinite loop. <ref>Ever been stuck in a loop?
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&t=2109]</ref>

=== The Throat Marble ===
This is a symptom one can have while visiting Hyperspace. Feeling as though you don't need to breathe. Also discribed as the feeling of a rolling ball trapped in the back of ones throat. <ref>Strange "Ball" Feeling
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&t=4786]</ref>

=== Exploring ===
This is a symptom one has after the return from Hyperspace. Also described as a warped or more appreciative view of reality. Symptoms include seeing sounds and hearing colors.

=== Bifurcations ===
From a single point or concept [node] a 2 path branch appears [often both visually and in sense of thought/concepts] of both potentials.
This often is experienced as then proceeding into an infinite number of branches

=== Mirror ===
When a DMT journey travels in time one way [standard forward], and then near the end of the trip quickly rewinds back through the entire trip

=== DMT Fold ===
Folding back into 'normal space' after a trip. May be seen as similar to 2 steps coming together
|_ _|
|_ _|
|_|
Perceived as more complex 'concepts'/realities folding down into simpler / more normal / less infinite 'concepts' /realities.
The aspects of the previous (higher) level not being able to be described by the lower level except as metaphor.

=== Audio Wind up/out ===
Where near the end of an experience as the entities leave your perceptual field their communication changes into a 'winding up sound', similar to an audio delay being fed back into itself and the rate increased until it just becomes a buzz as it disappears.
The sound is also highly resonant [i.e. chime or bell like]

== Reference ==
<references/>

== Links ==
* [http://en.wikipedia.org/wiki/List_of_medical_roots,_suffixes_and_prefixes medical roots, suffixes and prefixes]
* [http://en.wikipedia.org/wiki/Glossary_of_anatomical_terminology,_definitions_and_abbreviations anatomical terms]
* [http://www.solarviews.com/eng/terms.ht astronomy terms]
* [http://www.chemistry-dictionary.com/dictionary.php?w=A chemistry terms]
* [http://www.ibiblio.org/botnet/glossary/ botanical terms]

[[Category:Terminology]]
[[Category:DMT-Nexus Projects]]

Hyperspace lexicon

2010-02-23T13:40:59Z

Rawmo:

{{ShowInfo|[[Image:Note_error.png]]|'''Note:'''|This page is a collection of phrases from 'the Proposed project to better understand Hyperspace' <ref>Proposed project to better understand Hyperspace
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&m=65786]</ref> and 'Hyperspace Lexicon work thread' <ref>Hyperspace Lexicon work thread
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&m=65842]</ref>. Feel free to make additions}}

The Hyperspace lexicon is here to make a compilation of phrases to better understand and describe hyperspace journeys for both the layman and advanced hyperspace travelers.

== Collection ==

=== Breakthrough ===
State traveler gets after ingesting the breakthrough dose of DMT.

=== Candyland ===
The visual of a pristine polished "enhanced" open eyed reality.

=== Carrier wave ===
Just after a launch, [[Traveler|travelers]] often hear a ringing tone or vibration somewhat resembling a carrier wave. As the ringing sensation continues one can even feel that this vibration is 'resonating in every cell of the body'.

=== Entities ===
[[Hyperspace]] is filled with entities. These entities show a remarkable variety in appearance and behavior. This chapter includes some often sighted entities.

==== Cartoons ====
==== Dragon ====
==== Gnomes ====
==== Grays ====
==== Light beings ====
==== Machine elves ====

The Tykes. [http://deoxy.org/timemind.htm]

==== Praying Mantis ====
==== Reptiloids ====
==== Snakes ====

=== Spice ===
Slang term for DMT/Dimitri/Teamwork/Deemster

=== Jungle Spice ===
The darker spice that looks yellowish to reddish

=== Glass chrysanthemum ===
The kaleidoscopic/fractal pattern that turns into the doorway to [[Hyperspace]].[http://www.dmt-nexus.com/forum/default.aspx?g=posts&t=5549]

=== Gifts/Presents ===
Sometimes the [[Entity|entities]] present gifts to the [[Hyperspace|hyperspace]] [[Traveler|traveler]]. These gifts can be 'sculptures', 'orbs', 'Faberge eggs from mars', 'extra-terrestrial notions', 'glyphs' and many other things.

=== Hyperspace ===
The place you go to after breakthrough, can be any place and time imaginable. Where the impossible can easily happen, extreme geometric explosions of color, sound, emotions, information, also the feeling of it being [[hyperreal]].

=== Jimjam ===
{{:Jimjam}}<ref>Jorkest's D-Limonene & Fumaric Acid Approach
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&m=65307#post65307]</ref> Also see [[Plasmatis]].

=== Planck Time ===
The smallest unit of time that can be mathematically described. When you feel time compressing in to smaller and smaller units, you are approaching Planck Time. When you reach it, you experience time 'stopping'.

=== Plasmatis ===
The multicolored constantly shifting gel-goo of amazement which decorates the space around everything in the land of the [[elves]]. Also see [[Jimjam]].

=== Pre flight anxiety ===
Pre flight anxiety is the anxiety one has just before liftoff into [[Hyperspace]]. Since being shot into hyperspace is such a stressful and powerful moment people are in some way afraid of that moment, the anxiety they undergo at that specific moment is known as 'pre flight anxiety'.
Many also report that this Pre flight anxiety diminishes shortly after entering hyperspace or upon returning from hyperspace.

=== SPO ===
===== Short description =====
Static Pattern Overlay
===== Long description =====
The static pattern overlay(SPO?) is the way 'they' communicate with me on lower doses. Faces from every ancient era show up in any uniform surface. The best ever was a picture of my favorite fractal. I thought I would be most fascinated by the fractal swirls but the static, slightly irregular monochromatic background showed me more in one square foot than I'd ever seen before. I am always like-'how do they do that?' or 'they are so clever' because you can blink or look away change your point of view and the same image persists! <ref>Breakthrough with eyes open?
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&m=47009#post47009]</ref>

=== Stuck in a loop ===
When your mind keeps repeating the same thoughts or events over and over again in a seemingly infinite loop. <ref>Ever been stuck in a loop?
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&t=2109]</ref>

=== The Throat Marble ===
This is a symptom one can have while visiting Hyperspace. Feeling as though you don't need to breathe. Also discribed as the feeling of a rolling ball trapped in the back of ones throat. <ref>Strange "Ball" Feeling
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&t=4786]</ref>

=== Exploring ===
This is a symptom one has after the return from Hyperspace. Also described as a warped or more appreciative view of reality. Symptoms include seeing sounds and hearing colors.

=== Bifurcations ===
From a single point or concept [node] a 2 path branch appears [often both visually and in sense of thought/concepts] of both potentials.
This often is experienced as then proceeding into an infinite number of branches

=== Mirror ===
When a DMT journey travels in time one way [standard forward], and then near the end of the trip quickly rewinds back through the entire trip

=== DMT Fold ===
Folding back into 'normal space' after a trip. May be seen as similar to 2 steps coming together
|_ _|
|_ _|
|_|
Perceived as more complex 'concepts'/realities folding down into simpler / more normal / less infinite 'concepts' /realities.
The aspects of the previous (higher) level not being able to be described by the lower level except as metaphor.

== Reference ==
<references/>

== Links ==
* [http://en.wikipedia.org/wiki/List_of_medical_roots,_suffixes_and_prefixes medical roots, suffixes and prefixes]
* [http://en.wikipedia.org/wiki/Glossary_of_anatomical_terminology,_definitions_and_abbreviations anatomical terms]
* [http://www.solarviews.com/eng/terms.ht astronomy terms]
* [http://www.chemistry-dictionary.com/dictionary.php?w=A chemistry terms]
* [http://www.ibiblio.org/botnet/glossary/ botanical terms]

[[Category:Terminology]]
[[Category:DMT-Nexus Projects]]

Noman's tek

2009-10-30T06:21:33Z

Rawmo: /* FAQ Section - */

{{ShowInfo|[[Image:Note_error.png]]|'''Note:'''|This page is a transcription of Noman's Tek<ref>DMT for the Masses. . . a mhrb extraction tek by Noman
[http://www.dmt-nexus.com/doc/nomans_dmt_extraction_tek.pdf]</ref>. The content is to remain accurate as such.}}

=== DMT for the Masses ===
… a mhrb extraction tek by Noman

An updated and edited reprint of the same-named article from The Entheogen Review, Autumnal Equinox 2006, Volume XV, Number 3, edited by noman and zhah March, 2007.

==== Disclaimer ====
First things first. Performing this procedure is illegal in most countries. I do not advocate performing it where illegal and I do not perform it myself where illegal.

The intent of this tek is to simplify the extraction procedure as much as possible and make it doable for the average person in the average kitchen in an evening. While I think that I have accomplished this, it does not mean that one does not have to do their homework. You should read a few teks before deciding on one and research the chemicals and procedures that you will be using. I don’t give instructions for decanting, siphoning, and filtering, for example, because I assume that you have educated yourself on these simple procedures and that I don’t have to clutter up my tek with them. You should treat this procedure as a starting point from which it is up to you to discover the best way to proceed based upon the materials and equipment available to you.

Okay, so onward to DMT for the Masses.

Have fun, be safe, and share your findings!

==== Materials ====
* Dust mask, safety goggles and rubber gloves
* [[Mimosa Hostilis]] root bark
* A coﬀee grinder or heavy duty blender (one that will crush ice)
* Mixing jar – this should be glass with a wide mouth and a tight fitting lid. A quart jar can do 50g of bark, a gallon pickle jar can do 200g.
* Water
* Lye (granulated NaOH)
* Vinegar (for neutralizing lye spills)
* Naptha – get VM+P and not lighter ﬂuid
* Collection jars – 4 wide mouth 8 oz (250mL) jelly jars with lids
* Separating apparatus – a separatory funnel is easiest but siphoning and decanting will work fine.
* Coﬀee filters
* Rubber spatula
* Very cold freezer – should freeze ice cream HARD
* Non-sudsy ammonia – 10% solution, e.g. “janitorial strength” from Ace hardware, is optimal, but 5% “household strength” will do as well.
* Eye-dropper

==== Extraction Procedure ====
# Pulverize the bark until it’s just fiber and pink/purple dust. It should be snapped into small pieces and run through a coﬀee grinder or blender at high speed. You may need pruning shears to cut the bark small enough to grind properly. It needs to be completely broken down. The dust created is very fine and astringent to the respiratory tract. Unless you dig big cakey purple boogers, wear a mask.
# Mix 15mL water and 1g lye per gram of bark in the mixing jar. For example: 50g bark would require 750mL water and 50g lye. One level tablespoon of lye weighs about 15g, though this can vary considerably, better to use a scale. Note that lye is dangerous. Blind you forever dangerous. Wear eye protection and have a bottle of vinegar handy as a neutralizer and for clean up. Add the lye to the water slowly stirring constantly until completely dissolved.
# Add the powdered bark, cap and shake the jar and let the bark soak for awhile. An hour or so.
# Now add 1mL naptha per gram of bark in the mixing jar and turn the jar end over end. Do not shake or splash or there will be a tendency for the solution to form an emulsion. Simply roll the naptha around in the bark solution. Do this for one minute and then let the jar stand until the naptha has pretty much separated to the top. <br> Repeat agitation three more times.
# After the final agitation, separate the two layers. The naptha (top layer) goes in one of the collection jars, the rest stays in the mixing jar with the bark.
# Put the collection jar in the freezer.
# Repeat steps 4 to 6 three more times. Leave the last NP extraction in the jar for a day or two, agitating occasionally to pick up any strays.
# Go to bed. You should have a collection of snow globes waiting for you in the morning.
# Pour each jar of naptha out through a coﬀee filter. Save the naptha, which can be reused in the next batch or evaporated down producing a residue which can be further refined (see recrystallization below). A lot of paste will stick to the sides of the jar, so use a small rubber spatula to scrape the sides down onto the filter as well. Spread each filter out to dry. There will still be some residue in the jars, a bit of Salvia or MJ will scrub them out nicely.
# '''(WARNING! Noman said: "Get rid of that goddamn ammonia wash. My friend has never had trouble with it but it seems to cause problems for at least half the people that do it.")''' Once the paste has dried THOROUGHLY (chop and stir it a couple of times), crush any lumps up and combine it all into one coﬀee filter. Now wash the lot by pouring freezer temperature NON-SUDSY ammonia over it and through the coﬀee filter. This will remove any remaining lye and some other impurities from the extract. If you can get 10% ammonia (“janitorial strength”) all the better. Most important, though, is NON-SUDSY: shake the bottle, if it suds, get a diﬀerent bottle. It won’t take much, 100mL or so for a 200g batch, just make sure all the powder is thoroughly wetted, and stir it around while washing. A good bit of the mass will wash away (25–45%) but it’s nothing you want to be smoking anyway. (Note: if you intend to recrystallize, you can omit the ammonia wash).

You should be left with somewhere in the vicinity of 0.5% of the weight of the root-bark in DMT powder. It is perfectly smokable at this point, but it can be refined further by recrystallization. Although recrystallization inevitably results in loss of goods, once you’ve had a hit of DMT that left absolutely NOTHING behind in the pipe, you won’t want to use anything else.

==== Recrystallization ====
The idea behind recrystallization is that solvents generally hold more solute when hot than cold and that the solubility of diﬀerent solutes varies diﬀerently with temperature. If a solvent with a lot of diﬀerent solutes dissolved in it cools down slowly, the diﬀerent solutes will precipitate individually. Naptha will work for this but heptane is better. Heptane is available as Bestine – a rubber cement remover.

Place a glass container with the DMT and a glass container of the recrystallization solvent together in a pan of hot water. Shot glasses in a saucepan work well for a gram or two. The fumes from whatever solvent you use will be extremely ﬂammable, so don’t use a gas stove or light a bowl or be otherwise stupid. The DMT will already be melting if the water is hot enough. Add the hot solvent little by little (eye-dropper), agitating until all of the DMT is dissolved. Use as little solvent as possible. It should take only about 20–30mL of solvent per gram of powder. The solvent will be a clear yellow.

Leave the pan of water with the DMT container to cool to room temperature. Remove the DMT container and cool in the refrigerator, then the freezer. You will end up with DMT crystals of varying purity atop a pellet of slag which still contains quite a bit of DMT but also lye if you skipped the ammonia wash. Filter the solvent and separate the crystals from the slag. The crystals can be refined in one or two more recrystallizations into pure clear DMT if desired. The slag can also be further refined or simply redissolved into the next batch. The solvent can be reused or evaporated down and the residue scraped and cleaned.

And don’t forget to scrub those jars and utensils with your favorite smoking herb!

== Remarks ==
According to Noman himself he was working on a revision that would include the following: <ref>Noman Tek Revisions
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&t=872]</ref>
* "'''Get rid of that goddamn ammonia wash. My friend has never had trouble with it but it seems to cause problems for at least half the people that do it.''' I'll change it to a wash of the NP with a weak basic solution."
* "Note that if pre-powdered bark is being used, 1.5 - 2X of the water called for will be required."
* "Add that using heat for the last pull will increase yield. I left that out of the original for the sake of simplicity, but it probably should be mentioned."
* "Go into more detail about the freeze precip. When I wrote the tek, commonly available bark was of much higher quality. Now a partial evap is sometimes necessary to get the solution concentrated enough to precip."

Entropmancer advices the following to Noman: [http://www.dmt-nexus.com/forum/default.aspx?g=posts&t=872&p=2#26951]
* "Noman, I have one suggestion regarding your tek. I think that calling for a bit less naphtha would make it so that peoples' extractions are concentrated enough to freeze-precip more often. (It may end up taking them one or two more pulls to get all the spice, but I think that easy freeze-precipitation is a good trade-off for one or two extra pulls). <br />SWIM found that when using somewhere around 0.4 mL of naphtha per gram of bark (doing every pull with heated naphtha), every pull except the last one freeze-precipitated easily. (This was with an A/B in a sep funnel, but I don't see why it wouldn't work as well with an STB)"

== Reference ==
<references/>

----

== '''FAQ Section -''' ==

'''1] How important is it to use fresh Naptha for each DMT extraction?'''

A] You'll get significantly better quality [r.e. pure white crystals] extractions if you use fresh Naptha for each extraction. Being eco-friendly and recycling is great and all that, but if you want to save the planet there's probably more productive ways in the long term than saving and reusing your naptha. It tends to get contaminated with other plant oils etc that reduce the amount of DMT that can enter the solution. Fresh Naptha will also mean that you don't get as much DMT-oxide, oils contaminating your final product and a better freeze precipitation.

'''2] Naptha recommended amount per gram of MHRB (from Entropymancer above)'''

A - Try 0.4ml per gram MHRB compared to 1ml and do a few more pulls. This will make the freeze precipitation better.
The vast majority (rawmo personal experience) of DMT (expectedly perhaps) comes from the first pull, so if you have 2 containers for precipitation and are in a rush do the first pull in one and the rest in the other.

'''3] Recommendations on Evaporation'''

Minimize airflow above your final evaporation dish, [e.g. from fans]. Airflow turns DMT into DMT-oxide, which is yellow, sticky and apparently not as strong (or different effect) depending on who you talk to. If you want to make DMT oxide add Hydrogen Peroxide (H2O2) to your DMT later.

'''4] Lots of DMT-Oxide (yellow waxy goop) in the extraction'''

A - carry out a zinc powder extraction at ph3 on either the yellow DMT/DMT-oxide or do it before you carry out the base component of the extraction. Anecdotal reports say that MHRB (standardly rated at 0.57% DMT) can provide from 1-2% DMT if a zinc powder reduction is used beforehand.

P. viridis apparently has a high level of DMT oxide in it, so Zinc powder beforehand may produce better extraction results.

B - Don't blow a fan over your white crystals, they will go yellow and start absorbing water and go gooey.

C - Next time make up a vacuum unit. easy to do with 2 hoses (e.g. 18mm, 9mm, a tap attachment and a strong tuperware style or glass container with a hole drilled in it).

'''5] Separating the two layers [polar/non-polar]'''

A- use a separatory funnel if you can get one, or -

B - Syringes work well (get from needle exchange if you're comfortable with that)

C - Get some e.g. 9mm tubing from e.g. aquarium shops, a plastic bottle e.g. 1.5L. make a small hole in the bottle big enough for an airtight fit for the tube. Take off top from the bottle, expel air, replace cap. suck up Naptha into the bottle by returning it to its normal shape. Decant naptha into evap dish.

D - Turkey baster suck up. Buy off net.

E - Suck up with a hose using your lungs... like siphoning petrol, , it'll work, but probably hurt your brain long term.

[[Category:Extraction Tek]]
[[Category:Straight To Base]]
[[Category:DMT]]

Noman's tek

2009-10-30T06:17:00Z

Rawmo:

{{ShowInfo|[[Image:Note_error.png]]|'''Note:'''|This page is a transcription of Noman's Tek<ref>DMT for the Masses. . . a mhrb extraction tek by Noman
[http://www.dmt-nexus.com/doc/nomans_dmt_extraction_tek.pdf]</ref>. The content is to remain accurate as such.}}

=== DMT for the Masses ===
… a mhrb extraction tek by Noman

An updated and edited reprint of the same-named article from The Entheogen Review, Autumnal Equinox 2006, Volume XV, Number 3, edited by noman and zhah March, 2007.

==== Disclaimer ====
First things first. Performing this procedure is illegal in most countries. I do not advocate performing it where illegal and I do not perform it myself where illegal.

The intent of this tek is to simplify the extraction procedure as much as possible and make it doable for the average person in the average kitchen in an evening. While I think that I have accomplished this, it does not mean that one does not have to do their homework. You should read a few teks before deciding on one and research the chemicals and procedures that you will be using. I don’t give instructions for decanting, siphoning, and filtering, for example, because I assume that you have educated yourself on these simple procedures and that I don’t have to clutter up my tek with them. You should treat this procedure as a starting point from which it is up to you to discover the best way to proceed based upon the materials and equipment available to you.

Okay, so onward to DMT for the Masses.

Have fun, be safe, and share your findings!

==== Materials ====
* Dust mask, safety goggles and rubber gloves
* [[Mimosa Hostilis]] root bark
* A coﬀee grinder or heavy duty blender (one that will crush ice)
* Mixing jar – this should be glass with a wide mouth and a tight fitting lid. A quart jar can do 50g of bark, a gallon pickle jar can do 200g.
* Water
* Lye (granulated NaOH)
* Vinegar (for neutralizing lye spills)
* Naptha – get VM+P and not lighter ﬂuid
* Collection jars – 4 wide mouth 8 oz (250mL) jelly jars with lids
* Separating apparatus – a separatory funnel is easiest but siphoning and decanting will work fine.
* Coﬀee filters
* Rubber spatula
* Very cold freezer – should freeze ice cream HARD
* Non-sudsy ammonia – 10% solution, e.g. “janitorial strength” from Ace hardware, is optimal, but 5% “household strength” will do as well.
* Eye-dropper

==== Extraction Procedure ====
# Pulverize the bark until it’s just fiber and pink/purple dust. It should be snapped into small pieces and run through a coﬀee grinder or blender at high speed. You may need pruning shears to cut the bark small enough to grind properly. It needs to be completely broken down. The dust created is very fine and astringent to the respiratory tract. Unless you dig big cakey purple boogers, wear a mask.
# Mix 15mL water and 1g lye per gram of bark in the mixing jar. For example: 50g bark would require 750mL water and 50g lye. One level tablespoon of lye weighs about 15g, though this can vary considerably, better to use a scale. Note that lye is dangerous. Blind you forever dangerous. Wear eye protection and have a bottle of vinegar handy as a neutralizer and for clean up. Add the lye to the water slowly stirring constantly until completely dissolved.
# Add the powdered bark, cap and shake the jar and let the bark soak for awhile. An hour or so.
# Now add 1mL naptha per gram of bark in the mixing jar and turn the jar end over end. Do not shake or splash or there will be a tendency for the solution to form an emulsion. Simply roll the naptha around in the bark solution. Do this for one minute and then let the jar stand until the naptha has pretty much separated to the top. <br> Repeat agitation three more times.
# After the final agitation, separate the two layers. The naptha (top layer) goes in one of the collection jars, the rest stays in the mixing jar with the bark.
# Put the collection jar in the freezer.
# Repeat steps 4 to 6 three more times. Leave the last NP extraction in the jar for a day or two, agitating occasionally to pick up any strays.
# Go to bed. You should have a collection of snow globes waiting for you in the morning.
# Pour each jar of naptha out through a coﬀee filter. Save the naptha, which can be reused in the next batch or evaporated down producing a residue which can be further refined (see recrystallization below). A lot of paste will stick to the sides of the jar, so use a small rubber spatula to scrape the sides down onto the filter as well. Spread each filter out to dry. There will still be some residue in the jars, a bit of Salvia or MJ will scrub them out nicely.
# '''(WARNING! Noman said: "Get rid of that goddamn ammonia wash. My friend has never had trouble with it but it seems to cause problems for at least half the people that do it.")''' Once the paste has dried THOROUGHLY (chop and stir it a couple of times), crush any lumps up and combine it all into one coﬀee filter. Now wash the lot by pouring freezer temperature NON-SUDSY ammonia over it and through the coﬀee filter. This will remove any remaining lye and some other impurities from the extract. If you can get 10% ammonia (“janitorial strength”) all the better. Most important, though, is NON-SUDSY: shake the bottle, if it suds, get a diﬀerent bottle. It won’t take much, 100mL or so for a 200g batch, just make sure all the powder is thoroughly wetted, and stir it around while washing. A good bit of the mass will wash away (25–45%) but it’s nothing you want to be smoking anyway. (Note: if you intend to recrystallize, you can omit the ammonia wash).

You should be left with somewhere in the vicinity of 0.5% of the weight of the root-bark in DMT powder. It is perfectly smokable at this point, but it can be refined further by recrystallization. Although recrystallization inevitably results in loss of goods, once you’ve had a hit of DMT that left absolutely NOTHING behind in the pipe, you won’t want to use anything else.

==== Recrystallization ====
The idea behind recrystallization is that solvents generally hold more solute when hot than cold and that the solubility of diﬀerent solutes varies diﬀerently with temperature. If a solvent with a lot of diﬀerent solutes dissolved in it cools down slowly, the diﬀerent solutes will precipitate individually. Naptha will work for this but heptane is better. Heptane is available as Bestine – a rubber cement remover.

Place a glass container with the DMT and a glass container of the recrystallization solvent together in a pan of hot water. Shot glasses in a saucepan work well for a gram or two. The fumes from whatever solvent you use will be extremely ﬂammable, so don’t use a gas stove or light a bowl or be otherwise stupid. The DMT will already be melting if the water is hot enough. Add the hot solvent little by little (eye-dropper), agitating until all of the DMT is dissolved. Use as little solvent as possible. It should take only about 20–30mL of solvent per gram of powder. The solvent will be a clear yellow.

Leave the pan of water with the DMT container to cool to room temperature. Remove the DMT container and cool in the refrigerator, then the freezer. You will end up with DMT crystals of varying purity atop a pellet of slag which still contains quite a bit of DMT but also lye if you skipped the ammonia wash. Filter the solvent and separate the crystals from the slag. The crystals can be refined in one or two more recrystallizations into pure clear DMT if desired. The slag can also be further refined or simply redissolved into the next batch. The solvent can be reused or evaporated down and the residue scraped and cleaned.

And don’t forget to scrub those jars and utensils with your favorite smoking herb!

== Remarks ==
According to Noman himself he was working on a revision that would include the following: <ref>Noman Tek Revisions
[http://www.dmt-nexus.com/forum/default.aspx?g=posts&t=872]</ref>
* "'''Get rid of that goddamn ammonia wash. My friend has never had trouble with it but it seems to cause problems for at least half the people that do it.''' I'll change it to a wash of the NP with a weak basic solution."
* "Note that if pre-powdered bark is being used, 1.5 - 2X of the water called for will be required."
* "Add that using heat for the last pull will increase yield. I left that out of the original for the sake of simplicity, but it probably should be mentioned."
* "Go into more detail about the freeze precip. When I wrote the tek, commonly available bark was of much higher quality. Now a partial evap is sometimes necessary to get the solution concentrated enough to precip."

Entropmancer advices the following to Noman: [http://www.dmt-nexus.com/forum/default.aspx?g=posts&t=872&p=2#26951]
* "Noman, I have one suggestion regarding your tek. I think that calling for a bit less naphtha would make it so that peoples' extractions are concentrated enough to freeze-precip more often. (It may end up taking them one or two more pulls to get all the spice, but I think that easy freeze-precipitation is a good trade-off for one or two extra pulls). <br />SWIM found that when using somewhere around 0.4 mL of naphtha per gram of bark (doing every pull with heated naphtha), every pull except the last one freeze-precipitated easily. (This was with an A/B in a sep funnel, but I don't see why it wouldn't work as well with an STB)"

== Reference ==
<references/>

----

== '''FAQ Section -''' ==

'''1] How important is it to use fresh Naptha for each DMT extraction?'''

A] You'll get significantly better quality [r.e. pure white crystals] extractions if you use fresh Naptha for each extraction. Being eco-friendly and recycling is great and all that, but if you want to save the planet there's probably more productive ways in the long term than saving and reusing your naptha. It tends to get contaminated with other plant oils etc that reduce the amount of DMT that can enter the solution. Fresh Naptha will also mean that you don't get as much DMT-oxide, oils contaminating your final product and a better freeze precipitation.

'''2] Naptha recommended amount per gram of MHRB (from Entropymancer above)'''
A - Try 0.4ml per gram MHRB compared to 1ml and do a few more pulls. This will make the freeze precipitation better.
The vast majority (rawmo personal experience) of DMT (expectedly perhaps) comes from the first pull, so if you have 2 containers for precipitation and are in a rush do the first pull in one and the rest in the other.

'''3] Recommendations on Evaporation'''

Minimize airflow above your final evaporation dish, [e.g. from fans]. Airflow turns DMT into DMT-oxide, which is yellow, sticky and apparently not as strong (or different effect) depending on who you talk to. If you want to make DMT oxide add Hydrogen Peroxide (H2O2) to your DMT later.

'''4] Lots of DMT-Oxide (yellow waxy goop) in the extraction'''

A - carry out a zinc powder extraction at ph3 on either the yellow DMT/DMT-oxide or do it before you carry out the base component of the extraction. Anecdotal reports say that MHRB (standardly rated at 0.57% DMT) can provide from 1-2% DMT if a zinc powder reduction is used beforehand.

P. viridis apparently has a high level of DMT oxide in it, so Zinc powder beforehand may produce better extraction results.

B - Don't blow a fan over your white crystals, they will go yellow and start absorbing water and go gooey.

C - Next time make up a vacuum unit. easy to do with 2 hoses (e.g. 18mm, 9mm, a tap attachment and a strong tuperware style or glass container with a hole drilled in it).

'''5] Separating the two layers [polar/non-polar]'''

A- use a separatory funnel if you can get one, or -

B - Syringes work well (get from needle exchange if you're comfortable with that)

C - Get some e.g. 9mm tubing from e.g. aquarium shops, a plastic bottle e.g. 1.5L. make a small hole in the bottle big enough for an airtight fit for the tube. Take off top from the bottle, expel air, replace cap. suck up Naptha into the bottle by returning it to its normal shape. Decant naptha into evap dish.

D - Turkey baster suck up. Buy off net.

E - Suck up with a hose using your lungs... like siphoning petrol, , it'll work, but probably hurt your brain long term.

[[Category:Extraction Tek]]
[[Category:Straight To Base]]
[[Category:DMT]]

Category:Extraction Tek

2009-10-16T09:31:16Z

Rawmo: Replaced content with 'An Extraction Tek is a manual to extract certain chemicals from a given source. Category:Tek'

An Extraction Tek is a manual to extract certain chemicals from a given source.

[[Category:Tek]]

Category:Extraction Tek

2009-10-16T09:29:02Z

Rawmo: RebBarons Bufotenine extraction tek

An Extraction Tek is a manual to extract certain chemicals from a given source.

[[Category:Tek]]

== RebBaron's Yopo Extraction ==

[this was lifted (with further modifications) from a posting by Entropymancer on Bluelight.ru]

'''[[Ingredients/Reagents -]]'''

'''[[Acetone]]''': available at most hardware stores. This solvent is actually present in the human body in small amounts. It’s best to use distilled acetone that you distilled yourself if you’re at all worried about contaminants. KleanStrip acetone is pure acetone and 100.0 % volatile according to their MSDS, so there will be no residue left behind after evaporating it. SWIM uses this brand, always distills it, and never finds any left over residue. It seems to be very clean.

'''[[Pickling Lime]]''' (calcium Hydroxide): available at some grocery stores or aquarium stores (e.g. Reef Kalkwasser). It’s used to make pickles crispier. It’s not as poisonous or dangerous as the sodium hydroxide commonly used to extract DMT. Pickling lime is edible but only if greatly diluted.

'''[[Citric acid]]''': available as “sour salt” in some grocery stores or homebrew stores. It’s often used in canning. It’s available from many health food or vitamin shops. This is found naturally in fruit.

'''[[Filtering system]]''': coffee filters aren’t that good but will work. For best filtering results it’s better to use a lab filtering system (glass micro-fiber filters, a vacuum pump, and a filtering flask, Buchner funnel, etc.)

'''== [[Extraction steps -]] =='''

1) Prepare citric acid solution by adding 1 gram of citric acid to 10 ml of acetone. We’ll use it later so put this aside, go onto step 2, but mix the citric acid solution occasionally. It will eventually all dissolve after about an hour or so.
It's important to use dry acetone; acetone from the hardware store often has a small amount of water in the solution. It can be removed by pouring the acetone over rock salt and swirling for a few minutes; the water is all pulled into the salt. Don't use ordinary tablesalt, as it contains an anticaking agent that you probably don't want to end up smoking.

2) Mix 100 grams of crushed Anadenanthera seeds (either peregrina or colubrina works) with and equal volume of pickling lime (calcium hydroxide) and add enough water to form a paste. Let it sit for about 1 hour, mixing it a few times. Dry it completely in an oven at 65.5 C / 150 F.

3) Break apart the dried materal. Add 500 ml of acetone. Mix for about 5 minutes. Let the dry material settle to the bottom. The acetone should be reddish amber in color. Pour the acetone through a good quality filter.

4) Add 10 ml of citric acid solution (from step 1) to the filtered acetone and mix. Tiny crystals will form which look like yellow dust. Let the crystals settle to the bottom. Poor off the acetone, being careful not to pour off the crystals. Discard the acetone. Wash the crystals by adding 100 ml of fresh acetone, mix, let the crystals settle, and then carefully pour off the acetone and discard it
(you might want to let the acetone evaporate down to about 50 ml before discarding, as more precipitates might form. Keep in mind that a small amount of the alkaloids won’t precipitate out of the acetone. A small portion of this contains the tiny amount of DMT present in the seeds. If you save the acetone, you could extract the last bit of alkaloids using an A/B extraction, but it’s not really worth the trouble).
Let all the acetone evaporate off the crystals. They’ll start absorbing water from the air and become dark brown goo once all the acetone has evaporated.

5) Mix the crystal goo with an equal volume of pickling lime / calcium hydroxide. Add enough water to form a thin watery paste. Let it sit for about 1 hour while mixing a few times. Dry in an oven at 65.5 C / 150 F.

6) Break apart the dried material. Dissolve in 100 ml acetone for about 5 minutes, mixing a few times. Filter off the pickling time. Evaporate the acetone leaving behind 5-HO-DMT freebase as a single solid mass of amber micro-crystals (and a few other active freebase alkaloids). It looks like amber candy, not crystals. It’s very difficult to form large crystals, so don’t bother. Just scrape it up and store in an air tight container away from light.

You can repeat steps 3-6 with the same seed mix up to 4 more times to recover nearly all the alkaloids if you like, but since the seeds are so cheap, it’s probably not worth the effort.

The resulting product is active at 5-15 mg vaporized and is mostly 5-HO-DMT freebase.
The effects are unique without all the side effects of Yopo/Vilca snuff.

The onset after inhaling a large dose is about 3-5 minutes, peaking after 10-15 minutes, lasting a total of 1-2 hours. At 10 mg, there are both visual and auditory hallucinations. The auditory hallucinations are quite fascinating and unique to this alkaloid mix. It's got the visuals but almost none of the "mind-fuck" of most other psychedelics. It's not nearly as alien feeling as DMT. It's a more relaxed visionary experience. It's often said to be much more friendly than DMT.

What’s nice about this extraction is that it’s final product is more potent than DMT, cheaper, uses less toxic ingredients, doesn’t require a separatory funnel, and it can’t have those nasty problems with emulsions because it’s not a liquid/liquid extraction like most DMT extraction techs. It based on precipitating the desired alkaloids with is less trouble and less labor intensive than liquid/liquid extractions.

Don’t smoke this extract like its DMT. When smoking this extract, it's best to take several smaller inhalations spread out rather that one big inhalation. It’s more pleasant that way.

When smoked, the effects take a few minutes to come on and peak after 10-15 minutes. So as long as you smoke the entire dose before the peak hits, very little tolerance is developed.

If you smoke a 15 mg dose all at once as if smoking DMT, it is going to hit you REALLY HARD, and the first minute of the trip is going to be unpleasant with some side effects felt (a little nausea, possible tension, and strong tingling sensations) before the psychedelic effects start. These side effects will pass in a minute or so, but the entire first portion of the trip will not be as nice if taken this way.

Instead, you want to smoke the 15 mg dose spaced out in smaller doses so that you take about 5 minutes to smoke the entire dose. This will bypass the side effects altogether and the trip will be much more pleasant.

Here is some additional info:

'''[[Pickling lime (calcium hydroxide) can be substituted with equal portions of baking soda (sodium bicarbonate)]]''' without any other modifications to the tech. Baking soda is a strong enough base to freebase bufotenine in these seeds, making it extractable by acetone. The only problem is that, unlike pickling lime, baking soda is slightly soluble in acetone so you’ll end up with a tiny bit in your final product, but the results are still very potent, and actually easier to grind to a powder. Baking soda is difficult to work with though. It tends to splatter from the release of carbon dioxide gas bubbles. If using it, make sure to put your stuff in a very tall container so that when it does splatter is doesn’t end up coming out of the container.

'''[[You should not use an acid other that citric acid]]'''. None of the other acids tested worked in this tech. This tech is all about changing the solubility of the alkaloids in acetone. Citric acid is soluble in acetone, but many citrate salts are not. The freebase alkaloids are pretty much all soluble in acetone (bufotenine, bufotenine n-oxide, DMT, DMT n- oxide, 5-MeO-DMT, 5-MeO-DMT n-oxide, etc.). Bufotenine citrate (and the n-oxide) is insoluble in acetone and I believe that the 5-MeO-DMT citrate (and the n-oxide) is also insoluble in acetone. DMT citrate (and probably the n-oxide) is soluble in acetone. This is why this tech loses the small amount of DMT present in the seeds. This doesn’t matter because these seeds contain mostly just bufotenine and bufotenine n-oxide and very tiny amounts of the other alkaloids. This seems to be the case for both A. peregrina and A. colubrina.

Another note, in the oven drying steps, a temperature of 65.5 C / 150 F is hot enough to vaporize freebase DMT. But since this tech wouldn’t extract it anyway, it doesn’t matter. Freebase bufotenine vaporizes at 320 C /608 F, so that temperature is safe for the target alkaloid.